ASP C-19-119 Honda Ignition Cylinder High Security HO03 - Coded
ASP C-19-119 Honda Ignition Cylinder High Security
Please note: The locking bar from the cylinder being replaced must be reused if it is different from the one used with this cylinder.
2007-2013 Acura MDX
2007-2012 Acura RDX
2007-2014 Acura TL
2008-2014 Acura TSX
2011-2013 Acura ZDX
2003-2014 Honda Accord
2003-2012 Honda Civic
2010-2014 Honda Crosstour
2002-2014 Honda CR-V
2011-2014 Honda CR-Z
2003-2011 Honda Element
2009-2014 Honda Fit
2010-2014 Honda Insight
2005-2012 Honda Odyssey
2005-2014 Honda Pilot
2004-2005 Honda S2000
2006-2014 Honda Ridgeline
PLEASE VIEW ORIGINAL LOCK IMAGE TO CONFIRM-
There are at least 2 different variations of cylinder assembly
used on all Honda ignition locks using the HO03 high security
key. At this time the only variation available is the one in the
attached picture, part no. C-19-119.
Dimensions are 2-3/8 inches from the front of the plug to the
end of the plug, 2-1/2 inches from the front of the plug to the
end of the housing casting, and 4-1/2 inches from the front,
of the plug to the end of the locking bar.
There is one variation which uses the same plug and
housing but a slightly different locking bar. C-19-119 may be
used to service these applications if the original locking bar
can be reused. There is at least one other variation with
different dimension plug and housing, which cannot be serviced
with this cylinder.
Full exact year and model applications are unknown at this
time, you must compare the lock being replaced to this
information and picture.